Instagram Telegram Mail-bulk
Mail-bulk
Instagram
Phone-alt

Wire S2

Welding electrodes and welding wire are the most important welding consumables that are produced and supplied according to the world standards such as AWS and DIN. Due to the importance and sensitivity of welding joints, the quality and cleanliness of the steels used to produce wires used in the electrode and welding wire production industry are of particular importance.
According to the JIS G3503 standard, SWRY11 wire is used to produce coated electrodes according to the AWS A5.1 standard, including E 6013 and E7018. S2, S2Mo, and S4 wires are used to produce electrodes for the submersible welding process, and the chemical analysis of these wires is in accordance with the DIN EN 756 standard.
SG2 and SG3 wires are used to produce welding wires used in shielded gas welding processes and their chemical analysis is in accordance with DIN 8559 standard. The mechanical and chemical specifications of these wires are included in the following tables.  

High carbon steel wire rods :

Production process Microstructure Type of product Standard Grade
Hot rolling Ferrite Wire rod DIN EN 756 S2

Mechanical properties :

Elongattion

 Reduction of area R.A(%) Yield strength(MPa) Tensile strength(MPa) Tensile test standard
45-50 75-80 290-310 400-480

ISO 6892-1

Chemical Analysis :

Al

 Cu Ni Mo Cr S P Mn Si C Alloy

-

 - - - - - - 0.8 - 0.07

.Min
0.01 0.1 0.05 0.05 0.05 0.02 0.02 1.3 0.15 0.15

.Max
   

Max. of ovality

Available sizes(mm)

0.2mm

5.5
مشاهده اطلاعات بیشتر

Wire S2Mo

Welding electrodes and welding wire are the most important welding consumables that are produced and supplied according to the world standards such as AWS and DIN. Due to the importance and sensitivity of welding joints, the quality and cleanliness of the steels used to produce wires used in the electrode and welding wire production industry are of particular importance.
According to the JIS G3503 standard, SWRY11 wire is used to produce coated electrodes according to the AWS A5.1 standard, including E 6013 and E7018. S2, S2Mo, and S4 wires are used to produce electrodes for the submersible welding process, and the chemical analysis of these wires is in accordance with the DIN EN 756 standard.
SG2 and SG3 wires are used to produce welding wires used in shielded gas welding processes and their chemical analysis is in accordance with DIN 8559 standard. The mechanical and chemical specifications of these wires are included in the following tables.  

High carbon steel wire rods :

Production process Microstructure Type of product Standard Grade
Hot rolling Ferrite Wire rod DIN EN 756 S2Mo

Mechanical properties :

Elongattion

 Reduction of area R.A(%) Yield strength(MPa) Tensile strength(MPa) Tensile test standard
35-45 70-80 420-440 550-640

ISO 6892-1

Chemical Analysis :

Al

 Cu Ni Mo Cr S P Mn Si C Alloy

-

 - - 0.45 - - - 0.8 0.05 0.07

.Min
0.01 0.15 0.15 0.65 0.15 0.02 0.02 1.3 0.25 0.15

.Max
   

Max. of ovality

Available sizes(mm)

0.2mm

5.5
مشاهده اطلاعات بیشتر

Wire S4

Welding electrodes and welding wire are the most important welding consumables that are produced and supplied according to the world standards such as AWS and DIN. Due to the importance and sensitivity of welding joints, the quality and cleanliness of the steels used to produce wires used in the electrode and welding wire production industry are of particular importance.
According to the JIS G3503 standard, SWRY11 wire is used to produce coated electrodes according to the AWS A5.1 standard, including E 6013 and E7018. S2, S2Mo, and S4 wires are used to produce electrodes for the submersible welding process, and the chemical analysis of these wires is in accordance with the DIN EN 756 standard.
SG2 and SG3 wires are used to produce welding wires used in shielded gas welding processes and their chemical analysis is in accordance with DIN 8559 standard. The mechanical and chemical specifications of these wires are included in the following tables.  

High carbon steel wire rods :

Production process Microstructure Type of product Standard Grade
Hot rolling Ferrite Wire rod DIN EN 756 S4

Mechanical properties :

Elongattion

 Reduction of area R.A(%) Yield strength(MPa) Tensile strength(MPa) Tensile test standard
35-45 70-75 440-490 560-650

ISO 6892-1

Chemical Analysis :

Al

 Cu Ni Mo Cr S P Mn Si C Alloy

-

 - - - - - - 1.75 - 0.07

Min.
0.01 0.1 0.05 0.05 0.05 0.02 0.02 2.25 0.25 0.15

Max.
   

Max. of ovality

Available sizes(mm)

0.2mm

5.5
مشاهده اطلاعات بیشتر

Wire SG2

Welding electrodes and welding wire are the most important welding consumables that are produced and supplied according to the world standards such as AWS and DIN. Due to the importance and sensitivity of welding joints, the quality and cleanliness of the steels used to produce wires used in the electrode and welding wire production industry are of particular importance.
According to the JIS G3503 standard, SWRY11 wire is used to produce coated electrodes according to the AWS A5.1 standard, including E 6013 and E7018. S2, S2Mo, and S4 wires are used to produce electrodes for the submersible welding process, and the chemical analysis of these wires is in accordance with the DIN EN 756 standard.
SG2 and SG3 wires are used to produce welding wires used in shielded gas welding processes and their chemical analysis is in accordance with DIN 8559 standard. The mechanical and chemical specifications of these wires are included in the following tables.  

High carbon steel wire rods :

Production process Microstructure Type of product Standard Grade
Hot rolling Ferrite Wire rod DIN 8559 SG2

Mechanical properties :

Elongattion

 Reduction of area R.A(%) Yield strength(MPa) Tensile strength(MPa) Tensile test standard
45-50 75-80 330-370 480-560

ISO 6892-1

Chemical Analysis :

Al

 Cu Ni Mo Cr S P Mn Si C Alloy

-

 - - - - - - 1.3 0.8 0.06

Min.
0.01 0.1 0.05 0.05 0.05 0.02 0.02 1.6 1 0.12

Max.
   

Max. of ovality

Available sizes(mm)

0.2mm

5.5
مشاهده اطلاعات بیشتر

Wire SG3

Welding electrodes and welding wire are the most important welding consumables that are produced and supplied according to the world standards such as AWS and DIN. Due to the importance and sensitivity of welding joints, the quality and cleanliness of the steels used to produce wires used in the electrode and welding wire production industry are of particular importance.
According to the JIS G3503 standard, SWRY11 wire is used to produce coated electrodes according to the AWS A5.1 standard, including E 6013 and E7018. S2, S2Mo, and S4 wires are used to produce electrodes for the submersible welding process, and the chemical analysis of these wires is in accordance with the DIN EN 756 standard.
SG2 and SG3 wires are used to produce welding wires used in shielded gas welding processes and their chemical analysis is in accordance with DIN 8559 standard. The mechanical and chemical specifications of these wires are included in the following tables.  

High carbon steel wire rods :

Production process Microstructure Type of product Standard Grade
Hot rolling Ferrite Wire rod DIN 8559 SG3

Mechanical properties :

Elongattion

 Reduction of area R.A(%) Yield strength(MPa) Tensile strength(MPa) Tensile test standard
45-50 75-80 340-380 490-580

ISO 6892-1

Chemical Analysis :

Al

 Cu Ni Mo Cr S P Mn Si C Alloy

-

 - - - - - - 1.6 0.8 0.06

Min.
0.01 0.1 0.05 0.05 0.05 0.02 0.02 1.9 1.2 0.12

Max.
   

Max. of ovality

Available sizes(mm)

0.2mm

5.5
مشاهده اطلاعات بیشتر

Wire SWRY11

Welding electrodes and welding wire are the most important welding consumables that are produced and supplied according to the world standards such as AWS and DIN. Due to the importance and sensitivity of welding joints, the quality and cleanliness of the steels used to produce wires used in the electrode and welding wire production industry are of particular importance.
According to the JIS G3503 standard, SWRY11 wire is used to produce coated electrodes according to the AWS A5.1 standard, including E 6013 and E7018. S2, S2Mo, and S4 wires are used to produce electrodes for the submersible welding process, and the chemical analysis of these wires is in accordance with the DIN EN 756 standard.
SG2 and SG3 wires are used to produce welding wires used in shielded gas welding processes and their chemical analysis is in accordance with DIN 8559 standard. The mechanical and chemical specifications of these wires are included in the following tables.  

High carbon steel wire rods :

Production process Microstructure Type of product Standard Grade
Hot rolling Ferrite Wire rod JIS G3503 SWRY11

Mechanical properties :

Elongattion

 Reduction of area R.A(%) Yield strength(MPa) Tensile strength(MPa) Tensile test standard
45-50 75-80 210-280 330-380

ISO 6892-1

Chemical Analysis :

Al

 Cu Ni Mo Cr S P Mn Si C Alloy

-

 - - - - - - 0.35 - 0.04

Min.
0.01 0.1 0.05 0.05 0.05 0.02 0.02 0.65 0.03 0.09

Max.
   

Max. of ovality

Available sizes(mm)

0.2mm

5.5,6.5
مشاهده اطلاعات بیشتر
contact us :
Map-marker-alt

Head office: No. 911, Arash West, Tehran, Iran

Phone: (+98) 021 21000711-12-13-14

Postal code: 1917753759

Map-marker-alt

Hamadan office: No. 17, Corner of Bariri alley , North Saidieh , Hamedan , Iran

Phone: (+98) 081-38331050 / 081-38331080

Postal code: 6516773998

Map-marker-alt

Factory : Vian Industrial Town , Hamedan , Iran

Phone: (+98) 081-38251982 081-38251988

Postal code: 6553171850

Mail-bulk

admin@nnpm.ir

Quick access :
Routing:
Trust badge:

All material and intellectual rights of the site are reserved
Designed and implemented by Vieratec Academy